AI Image Generators

Explore the best AI Image Generators — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

Prosthesis

In medicine, a prosthesis (pl.: prostheses; from Ancient Greek: πρόσθεσις, romanized: prósthesis, lit. 'addition, application, attachment'), or a prosthetic implant, is an artificial device that replaces a missing body part, which may be lost through physical trauma, disease, or a condition present at birth (congenital disorder). Prostheses may restore the normal functions of the missing body part, or may perform a cosmetic function. A person who has undergone an amputation is sometimes referred to as an amputee, Rehabilitation for someone with an amputation is primarily coordinated by a physiatrist as part of an inter-disciplinary team consisting of physiatrists, prosthetists, nurses, physical therapists, and occupational therapists. Prostheses can be created by hand or with computer-aided design (CAD), a software interface that helps creators design and analyze the creation with computer-generated 2-D and 3-D graphics as well as analysis and optimization tools. == Types == A person's prosthetic device should be designed and assembled to meet their individual appearance and functional needs. Depending on personal circumstances, co-morbidities, budget or health insurance coverage, and access to medical care, decisions may need to balance aesthetics and function. In addition, for some individuals, a myoelectric device, a body-powered device, or an activity-specific device may be appropriate options. The person's future goals and vocational aspirations and potential capabilities may help them choose between one or more devices. Craniofacial prostheses include intra-oral and extra-oral prostheses. Extra-oral prostheses are further divided into hemifacial, auricular (ear), nasal, orbital and ocular. Intra-oral prostheses include dental prostheses, such as dentures, obturators, and dental implants. Prostheses of the neck include larynx substitutes, trachea and upper esophageal replacements, Some prostheses of the torso include breast prostheses which may be either single or bilateral, full breast devices or nipple prostheses. Penile prostheses are used to treat erectile dysfunction, perform phalloplasty procedures in men, and to build a new penis in female-to-male gender reassignment surgeries. === Limb prostheses === Limb prostheses include both upper- and lower-extremity prostheses. Upper-extremity prostheses are used at varying levels of amputation: forequarter, shoulder disarticulation, transhumeral prosthesis, elbow disarticulation, transradial prosthesis, wrist disarticulation, full hand, partial hand, finger, partial finger. A transradial prosthesis is an artificial limb that replaces an arm missing below the elbow. Upper limb prostheses can be categorized in three main categories: Passive devices, Body Powered devices, and Externally Powered (myoelectric) devices. Passive devices can either be passive hands, mainly used for cosmetic purposes, or passive tools, mainly used for specific activities (e.g. leisure or vocational). An extensive overview and classification of passive devices can be found in a literature review by Maat et.al. A passive device can be static, meaning the device has no movable parts, or it can be adjustable, meaning its configuration can be adjusted (e.g. adjustable hand opening). Despite the absence of active grasping, passive devices are very useful in bimanual tasks that require fixation or support of an object, or for gesticulation in social interaction. According to scientific data a third of the upper limb amputees worldwide use a passive prosthetic hand. Body Powered or cable-operated limbs work by attaching a harness and cable around the opposite shoulder of the damaged arm. A recent body-powered approach has explored the utilization of the user's breathing to power and control the prosthetic hand to help eliminate actuation cable and harness. The third category of available prosthetic devices comprises myoelectric arms. This particular class of devices distinguishes itself from the previous ones due to the inclusion of a battery system. This battery serves the dual purpose of providing energy for both actuation and sensing components. While actuation predominantly relies on motor or pneumatic systems, a variety of solutions have been explored for capturing muscle activity, including techniques such as Electromyography, Sonomyography, Myokinetic, and others. These methods function by detecting the minute electrical currents generated by contracted muscles during upper arm movement, typically employing electrodes or other suitable tools. Subsequently, these acquired signals are converted into gripping patterns or postures that the artificial hand will then execute. In the prosthetics industry, a trans-radial prosthetic arm is often referred to as a "BE" or below elbow prosthesis. Lower-extremity prostheses provide replacements at varying levels of amputation. These include hip disarticulation, transfemoral prosthesis, knee disarticulation, transtibial prosthesis, Syme's amputation, foot, partial foot, and toe. The two main subcategories of lower extremity prosthetic devices are trans-tibial (any amputation transecting the tibia bone or a congenital anomaly resulting in a tibial deficiency) and trans-femoral (any amputation transecting the femur bone or a congenital anomaly resulting in a femoral deficiency). A transfemoral prosthesis is an artificial limb that replaces a leg missing above the knee. Transfemoral amputees can have a very difficult time regaining normal movement. In general, a transfemoral amputee must use approximately 80% more energy to walk than a person with two whole legs. This is due to the complexities in movement associated with the knee. In newer and more improved designs, hydraulics, carbon fiber, mechanical linkages, motors, computer microprocessors, and innovative combinations of these technologies are employed to give more control to the user. In the prosthetics industry, a trans-femoral prosthetic leg is often referred to as an "AK" or above the knee prosthesis. A transtibial prosthesis is an artificial limb that replaces a leg missing below the knee. A transtibial amputee is usually able to regain normal movement more readily than someone with a transfemoral amputation, due in large part to retaining the knee, which allows for easier movement. Lower extremity prosthetics describe artificially replaced limbs located at the hip level or lower. In the prosthetics industry, a transtibial prosthetic leg is often referred to as a "BK" or below the knee prosthesis. Prostheses are manufactured and fit by clinical prosthetists. Prosthetists are healthcare professionals responsible for making, fitting, and adjusting prostheses and for lower limb prostheses will assess both gait and prosthetic alignment. Once a prosthesis has been fit and adjusted by a prosthetist, a rehabilitation physiotherapist (called physical therapist in America) will help teach a new prosthetic user to walk with a leg prosthesis. To do so, the physical therapist may provide verbal instructions and may also help guide the person using touch or tactile cues. This may be done in a clinic or home. There is some research suggesting that such training in the home may be more successful if the treatment includes the use of a treadmill. Using a treadmill, along with the physical therapy treatment, helps the person to experience many of the challenges of walking with a prosthesis. In the United Kingdom, 75% of lower limb amputations are performed due to inadequate circulation (dysvascularity). This condition is often associated with many other medical conditions (co-morbidities) including diabetes and heart disease that may make it a challenge to recover and use a prosthetic limb to regain mobility and independence. For people who have inadequate circulation and have lost a lower limb, there is insufficient evidence due to a lack of research, to inform them regarding their choice of prosthetic rehabilitation approaches. Lower extremity prostheses are often categorized by the level of amputation or after the name of a surgeon: Transfemoral (Above-knee) Transtibial (Below-knee) Ankle disarticulation (more commonly known as Syme's amputation) Knee disarticulation (also see knee replacement) Hip disarticulation, (also see hip replacement) Hemi-pelvictomy Partial foot amputations (Pirogoff, Talo-Navicular and Calcaneo-cuboid (Chopart), Tarso-metatarsal (Lisfranc), Trans-metatarsal, Metatarsal-phalangeal, Ray amputations, toe amputations). Van Nes rotationplasty ==== Prosthetic raw materials ==== Prosthetic are made lightweight for better convenience for the amputee. Some of these materials include: Plastics: Polyethylene Polypropylene Acrylics Polyurethane Wood (early prosthetics) Rubber (early prosthetics) Lightweight metals: Aluminum Composites: Carbon fiber reinforced polymers Wheeled prostheses have also been used extensively in the rehabilitation of injured domestic animals, including dogs, cats, pigs, rabbits, and
Read more →
Omni-Path

Omni-Path Architecture (OPA) is a high-performance communication architecture developed by Intel. It aims for low communication latency, low power consumption and a high throughput. It directly competes with InfiniBand. Intel planned to develop technology based on this architecture for exascale computing. The current owner of Omni-Path is Cornelis Networks. == History == Production of Omni-Path products started in 2015 and delivery of these products started in the first quarter of 2016. In November 2015, adapters based on the 2-port "Wolf River" ASIC were announced, using QSFP28 connectors with channel speeds up to 100 Gbit/s. Simultaneously, switches based on the 48-port "Prairie River" ASIC were announced. First models of that series were available starting in 2015. In April 2016, implementation of the InfiniBand "verbs" interface for the Omni-Path fabric was discussed. In October 2016, IBM, Hewlett Packard Enterprise, Dell, Lenovo, Samsung, Seagate Technology, Micron Technology, Western Digital and SK Hynix announced a joint consortium called Gen-Z to develop an open specification and architecture for non-volatile storage and memory products—including Intel's 3D Xpoint technology—which might in part compete against Omni-Path. Intel offered their Omni-Path products and components via other (hardware) vendors. For example, Dell EMC offered Intel Omni-Path as Dell Networking H-series, following the naming-standard of Dell Networking in 2017. In July 2019, Intel announced it would not continue development of Omni-Path networks and canceled OPA 200 series (200-Gbps variant of Omni-Path). In September 2020, Intel announced that the Omni-Path network products and technology would be spun out into a new venture with Cornelis Networks. Intel would continue to maintain support for legacy Omni-Path products, while Cornelis Networks continues the product line, leveraging existing Intel intellectual property related to Omni-Path architecture. In 2021, Cornelis announced Omni-Path Express, which replaces PSM2-based drivers and middleware, which trace back to PathScale's PSM created in 2003, for the existing Omni-Path hardware, with a native libfabric provider.
Read more →
AS2

AS2 (Applicability Statement 2) is a specification on how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == Background == AS2 was created in 2002 by the IETF to replace AS1, which they created in the early 1990s. The adoption of AS2 grew rapidly throughout the early 2000s because major players in the retail and fast-moving consumer goods industries championed AS2. Walmart was the first major retailer to require its suppliers to use the AS2 protocol instead of relying on dial-up modems for ordering goods. Amazon, Target, Lowe's, Bed, Bath, & Beyond and thousands of others followed suit. Many other industries use the AS2 protocol, including healthcare, as AS2 meets legal HIPAA requirements. In some cases, AS2 is a way to bypass expensive value-added networks previously used for data interchange. == Technical overview == AS2 is specified in RFC 4130, and is based on HTTP and S/MIME. It was the second AS protocol developed and uses the same signing, encryption and MDN (as defined by RFC3798) conventions used in the original AS1 protocol introduced in the late 1990s by IETF. In other words: Files are encoded as "attachments" in a standardized S/MIME message (an AS2 message). AS2 does not specify the contents of the files. Usually, the file contents are in a standardized format that is separately agreed upon, such as XML or EDIFACT. AS2 messages are always sent using the HTTP or HTTPS protocol (Secure Sockets Layer — also known as SSL — is implied by HTTPS) and usually use the "POST" method (use of "GET" is rare). Messages can be signed, but do not have to be. Messages can be encrypted, but do not have to be. Messages may request a Message Disposition Notification (MDN) back if all went well, but do not have to request such a message. If the original AS2 message requested an MDN: Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but never encrypted (unless temporarily encrypted in transit via HTTPS). Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS2). If there are any problems receiving or interpreting the original AS2 message, a "failed" MDN may be sent back. However, part of the AS2 protocol states that the client must treat a lack of an MDN as a failure as well, so some AS2 receivers will not return an MDN in this case. Like any other AS file transfer, AS2 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place. AS2 trading partner names can usually be any valid phrase. === MDN options === Unlike AS1 or AS3 file transfers, AS2 file transfers offer several "MDN return" options instead of the traditional options of "yes" or "no". Specifically, the choices are: ==== AS2 w/ "Sync" MDNs ==== Return Synchronous MDN via HTTP(S) ("AS2 Sync") - This popular option allows AS2 MDNs to be returned to AS2 message sender clients over the same HTTP connection they used to send the original message. This "MDN while you wait" capability makes "AS2 Sync" transfers the fastest of any type of AS file transfer, but it also keeps this flavor of MDN requests from being used with large files (which may time out in low-bandwidth situations). ==== AS2 w/ "ASync" MDNs ==== Return Asynchronous MDN via HTTP(S) (a.k.a. "AS2 Async") - This popular option allows AS2 MDNs to be returned to the AS2 message sender's server later over a different HTTP connection. This flavor of MDN request is usually used if large files are involved or if your trading partner's AS2 server has poor Internet service. ==== AS2 w/ "Email" MDNs ==== Return (Asynchronous) MDN via Email - This rarely used option allows AS2 MDNs to be returned to AS2 message senders via email rather than HTTP. Otherwise, it is similar to "AS2 Async (HTTP)". ==== AS2 w/ No MDNs ==== Do not return MDN - This option works like it does in any other AS protocol: the receiver of an AS2 message with this option set simply does not try to return an MDN to the AS2 message sender. ==== Filename preservation ==== AS2 filename preservation feature will be used to communicate the filename to the trading partner. The banking industry relies on filenames being communicated between trading partners. AS2 vendors are currently certifying that implementation of filename communication conforms to the standard and is interoperable. There are two profiles for filename preservation being optionally tested under AS2 testing: Filename preservation without MDN responses Filename preservation with an associated MDN response certification Walmart recommends contacting Drummond Group, LLC for more information on EDIINT AS2, or for a list of interoperable-testing AS2 software providers. == Benefits == For many businesses, the use of AS2 and electronic data interchange (EDI) is not a choice so much as it is a requirement of doing business with a large customer or partner. That said, AS2 is a universal protocol that has benefits, from both business and technology vantage points. === Business case === Cut costs by using the web for EDI file transfers, AS2 reduces the cost of transactions from expensive VANs. Extend EDI to more partners; with lower costs and universal web connectivity, AS2 allows organizations to implement EDI with partners worldwide that have little EDI infrastructure. Save time by eliminating the need to manually process orders. Eliminate errors by turning manual processes into automated processes. Universal solution — AS2 is established and tested, so no one has to re-invent the wheel. === Technological advantages === Leverage the web: if an organization can share data securely via the web, they already have much of the infrastructure for AS2. Unlimited EDI data — there are no practical limitations on transaction sizes via the web, and AS2 includes features for managing large transfers. Payload Agnostic — AS2 can be used to transport any type of document. While EDI X12, EDIFACT and XML are common, any mutually agreed-upon format may be transferred.
Read more →
MDS matrix

An MDS matrix (maximum distance separable) is a matrix representing a function with certain diffusion properties that have useful applications in cryptography. Technically, an m × n {\displaystyle m\times n} matrix A {\displaystyle A} over a finite field K {\displaystyle K} is an MDS matrix if it is the transformation matrix of a linear transformation f ( x ) = A x {\displaystyle f(x)=Ax} from K n {\displaystyle K^{n}} to K m {\displaystyle K^{m}} such that no two different ( m + n ) {\displaystyle (m+n)} -tuples of the form ( x , f ( x ) ) {\displaystyle (x,f(x))} coincide in n {\displaystyle n} or more components. Equivalently, the set of all ( m + n ) {\displaystyle (m+n)} -tuples ( x , f ( x ) ) {\displaystyle (x,f(x))} is an MDS code, i.e., a linear code that reaches the Singleton bound. Let A ~ = ( I n A ) {\displaystyle {\tilde {A}}={\begin{pmatrix}\mathrm {I} _{n}\\\hline \mathrm {A} \end{pmatrix}}} be the matrix obtained by joining the identity matrix I n {\displaystyle \mathrm {I} _{n}} to A {\displaystyle A} . Then a necessary and sufficient condition for a matrix A {\displaystyle A} to be MDS is that every possible n × n {\displaystyle n\times n} submatrix obtained by removing m {\displaystyle m} rows from A ~ {\displaystyle {\tilde {A}}} is non-singular. This is also equivalent to the following: all the sub-determinants of the matrix A {\displaystyle A} are non-zero. Then a binary matrix A {\displaystyle A} (namely over the field with two elements) is never MDS unless it has only one row or only one column with all components 1 {\displaystyle 1} . Reed–Solomon codes have the MDS property and are frequently used to obtain the MDS matrices used in cryptographic algorithms. Serge Vaudenay suggested using MDS matrices in cryptographic primitives to produce what he called multipermutations, not-necessarily linear functions with this same property. These functions have what he called perfect diffusion: changing t {\displaystyle t} of the inputs changes at least m − t + 1 {\displaystyle m-t+1} of the outputs. He showed how to exploit imperfect diffusion to cryptanalyze functions that are not multipermutations. MDS matrices are used for diffusion in such block ciphers as AES, SHARK, Square, Twofish, Anubis, KHAZAD, Manta, Hierocrypt, Kalyna, Camellia and HADESMiMC, and in the stream cipher MUGI and the cryptographic hash function Whirlpool, Poseidon.
Read more →
You Only Look Once

You Only Look Once (YOLO) is a series of real-time object detection systems based on convolutional neural networks. First introduced by Joseph Redmon et al. in 2015, YOLO has undergone several iterations and improvements, becoming one of the most popular object detection frameworks. The name "You Only Look Once" refers to the fact that the algorithm requires only one forward propagation pass through the neural network to make predictions, unlike previous region proposal-based techniques like R-CNN that require thousands for a single image. == Overview == Compared to previous methods like R-CNN and OverFeat, instead of applying the model to an image at multiple locations and scales, YOLO applies a single neural network to the full image. This network divides the image into regions and predicts bounding boxes and probabilities for each region. These bounding boxes are weighted by the predicted probabilities. === OverFeat === OverFeat was an early influential model for simultaneous object classification and localization. Its architecture is as follows: Train a neural network for image classification only ("classification-trained network"). This could be one like the AlexNet. The last layer of the trained network is removed, and for every possible object class, initialize a network module at the last layer ("regression network"). The base network has its parameters frozen. The regression network is trained to predict the ( x , y ) {\displaystyle (x,y)} coordinates of two corners of the object's bounding box. During inference time, the classification-trained network is run over the same image over many different zoom levels and croppings. For each, it outputs a class label and a probability for that class label. Each output is then processed by the regression network of the corresponding class. This results in thousands of bounding boxes with class labels and probability. These boxes are merged until only one single box with a single class label remains. == Versions == There are two parts to the YOLO series. The original part contained YOLOv1, v2, and v3, all released on a website maintained by Joseph Redmon. === YOLOv1 === The original YOLO algorithm, introduced in 2015, divides the image into an S × S {\displaystyle S\times S} grid of cells. If the center of an object's bounding box falls into a grid cell, that cell is said to "contain" that object. Each grid cell predicts B bounding boxes and confidence scores for those boxes. These confidence scores reflect how confident the model is that the box contains an object and how accurate it thinks the box is that it predicts. In more detail, the network performs the same convolutional operation over each of the S 2 {\displaystyle S^{2}} patches. The output of the network on each patch is a tuple as follows: ( p 1 , … , p C , c 1 , x 1 , y 1 , w 1 , h 1 , … , c B , x B , y B , w B , h B ) {\displaystyle (p_{1},\dots ,p_{C},c_{1},x_{1},y_{1},w_{1},h_{1},\dots ,c_{B},x_{B},y_{B},w_{B},h_{B})} where p i {\displaystyle p_{i}} is the conditional probability that the cell contains an object of class i {\displaystyle i} , conditional on the cell containing at least one object. x j , y j , w j , h j {\displaystyle x_{j},y_{j},w_{j},h_{j}} are the center coordinates, width, and height of the j {\displaystyle j} -th predicted bounding box that is centered in the cell. Multiple bounding boxes are predicted to allow each prediction to specialize in one kind of bounding box. For example, slender objects might be predicted by j = 2 {\displaystyle j=2} while stout objects might be predicted by j = 1 {\displaystyle j=1} . c j {\displaystyle c_{j}} is the predicted intersection over union (IoU) of each bounding box with its corresponding ground truth. The network architecture has 24 convolutional layers followed by 2 fully connected layers. During training, for each cell, if it contains a ground truth bounding box, then only the predicted bounding boxes with the highest IoU with the ground truth bounding boxes is used for gradient descent. Concretely, let j {\displaystyle j} be that predicted bounding box, and let i {\displaystyle i} be the ground truth class label, then x j , y j , w j , h j {\displaystyle x_{j},y_{j},w_{j},h_{j}} are trained by gradient descent to approach the ground truth, p i {\displaystyle p_{i}} is trained towards 1 {\displaystyle 1} , other p i ′ {\displaystyle p_{i'}} are trained towards zero. If a cell contains no ground truth, then only c 1 , c 2 , … , c B {\displaystyle c_{1},c_{2},\dots ,c_{B}} are trained by gradient descent to approach zero. === YOLOv2 === Released in 2016, YOLOv2 (also known as YOLO9000) improved upon the original model by incorporating batch normalization, a higher resolution classifier, and using anchor boxes to predict bounding boxes. It could detect over 9000 object categories. It was also released on GitHub under the Apache 2.0 license. === YOLOv3 === YOLOv3, introduced in 2018, contained only "incremental" improvements, including the use of a more complex backbone network, multiple scales for detection, and a more sophisticated loss function. === YOLOv4 and beyond === Subsequent versions of YOLO (v4, v5, etc.) have been developed by different researchers, further improving performance and introducing new features. These versions are not officially associated with the original YOLO authors but build upon their work. As of 2026, versions up to YOLO26 have been released..
Read more →
Thirst trap

A thirst trap is a type of social media post intended to entice viewers sexually. It refers to a viewer's "thirst", a colloquialism likening sexual frustration to dehydration, implying desperation, with the afflicted individual being described as "thirsty". The phrase entered into the lexicon in the late 1990s, but is most related to Internet slang that developed in the early 2010s. Its meaning has changed over time, previously referring to a graceless need for approval, affection or attention. == History == The term thirst trap originated within selfie culture, though its precise origins remain unclear. An early use of the phrase with reference to dehydration appears in the 1999 book Running for Dummies by Florence Griffith Joyner and John Hanc, where it referred to the deceptive sensation of thirst being quenched after initial fluid intake, advising continued hydration to avoid the so-called "thirst trap." The modern usage of thirst trap resurfaced around 2011 on platforms such as Twitter and Urban Dictionary, coinciding with the growing popularity of Snapchat, Instagram, and dating apps like Tinder and Grindr. In 2011, Urban Dictionary defined it as "any statement used to intentionally create attention or 'thirst'." By 2018, the term had entered mainstream discourse, appearing in outlets such as The New York Times and GQ without the need for explanation. == Usage of the term == Often, the term thirst trap describes an attractive picture of an individual that they post online. Thirst trap can also describe a digital heartthrob. For instance, former Canadian prime minister Justin Trudeau has been described as a political thirst trap. It has also been described as a modern form of "fishing for compliments". == Motivation == Thirst trapping may be driven by a variety of motives. Individuals often seek attention through "likes" and comments on social media, which can offer a temporary sense of validation and improved self-esteem. It can also serve as an outlet for expressing one's sexuality or enhancing a personal brand. In some cases, sharing such content may provide financial gain. Others might post thirst traps to cope with emotional distress, such as after breakup, or to spite a former lover. Sharing a thirst trap has also been used as a way to connect in times of social isolation (e.g. COVID-19 pandemic). From a physiological standpoint, endorphins and neurotransmitters like oxytocin and dopamine are released during sexual contact. It has been speculated outside of the academic setting that sharing and engaging with thirst traps may elicit similar pleasure responses. == Methodology == Methodologies have developed to take an optimal thirst trap photo. Reporting for Vice magazine, Graham Isador found several of his social network contacts spent a lot of time considering how to take the best photo and what text they should use. They considered angles and lighting. Sometimes they made use of the self-timer feature available on some cameras. Often, body parts are put on display without being too explicit (e.g. bulges of male genitalia, breast cleavage, abdominal muscles, pectoral muscles, backs, buttocks). Often, the thirst trap is accompanied by a caption. For instance, in October 2019, actress Tracee Ellis Ross posted bikini pictures on Instagram with a caption that included the message: "I've worked so hard to feel good in my skin and to build a life that truly matches me and I'm in it and it feels good. ... No filter, no retouch 47 year old thirst trap! Boom!" On Instagram, #ThirstTrapThursdays is a popular tag. Followers reply in turn after a posting. == Variations == "Gatsbying" is a variation of the thirst trap, where one puts posts on social media to attract the attention of a particular individual. The term alludes to the novel The Great Gatsby where the character Jay Gatsby would throw extravagant parties to attract the attention of his love interest, Daisy. "Instagrandstanding" is an alternative name for this. "Wholesome trapping" has developed, where one posts pictures of more meaningful aspects of life, such as spending time with friends or doing outdoor activities. == Criticism == Psychotherapist Lisa Brateman has criticized thirst traps as an unhealthy method of receiving external validation. This desire for external validation can be addictive. Thirst traps can cause pressure to maintain a good physical appearance, and therefore cause self-esteem issues. Additionally, thirst traps are often highly choreographed and thus present a distorted perception of reality. The manufacturing of thirst traps can be limited when one enters a relationship or with time as the body ages. In some cases, thirst traps can lead to harassment and online bullying. In April 2020, model Chrissy Teigen posted a video of herself wearing a black one-piece swimsuit, and she received a multitude of negative comments that constituted bullying and body shaming.
Read more →
Torus interconnect

A torus interconnect is a switch-less network topology for connecting processing nodes in a parallel computer system. == Introduction == In geometry, a torus is created by revolving a circle about an axis coplanar to the circle. While this is a general definition in geometry, the topological properties of this type of shape describes the network topology in its essence. === Geometry illustration === In the representations below, the first is a one dimension torus, a simple circle. The second is a two dimension torus, in the shape of a 'doughnut'. The animation illustrates how a two dimension torus is generated from a rectangle by connecting its two pairs of opposite edges. At one dimension, a torus topology is equivalent to a ring interconnect network, in the shape of a circle. At two dimensions, it becomes equivalent to a two dimension mesh, but with extra connection at the edge nodes. === Torus network topology === A torus interconnect is a switch-less topology that can be seen as a mesh interconnect with nodes arranged in a rectilinear array of N = 2, 3, or more dimensions, with processors connected to their nearest neighbors, and corresponding processors on opposite edges of the array connected.[1] In this lattice, each node has 2N connections. This topology is named for the lattice formed in this way, which is topologically homogeneous to an N-dimensional torus. == Visualization == The first 3 dimensions of torus network topology are easier to visualize and are described below: 1D Torus: one dimension, n nodes are connected in closed loop with each node connected to its two nearest neighbors. Communication can take place in two directions, +x and −x. A 1D Torus is the same as ring interconnection. 2D Torus: two dimensions with degree of four, the nodes are imagined laid out in a two-dimensional rectangular lattice of n rows and n columns, with each node connected to its four nearest neighbors, and corresponding nodes on opposite edges connected. Communication can take place in four directions, +x, −x, +y, and −y. The total nodes of a 2D Torus is n2. 3D Torus: three dimensions, the nodes are imagined in a three-dimensional lattice in the shape of a rectangular prism, with each node connected with its six neighbors, with corresponding nodes on opposing faces of the array connected. Each edge consists of n nodes. communication can take place in six directions, +x, −x, +y, −y, +z, −z. Each edge of a 3D Torus consist of n nodes. The total nodes of 3D Torus is n3. ND Torus: N dimensions, each node of an N dimension torus has 2N neighbors, Communication can take place in 2N directions. Each edge consists of n nodes. Total nodes of this torus is nN. The main motivation of having higher dimension of torus is to achieve higher bandwidth, lower latency, and higher scalability. Higher-dimensional arrays are difficult to visualize. The above ruleset shows that each higher dimension adds another pair of nearest neighbor connections to each node. == Performance == A number of supercomputers on the TOP500 list use three-dimensional torus networks, e.g. IBM's Blue Gene/L and Blue Gene/P, and the Cray XT3. IBM's Blue Gene/Q uses a five-dimensional torus network. Fujitsu's K computer and the PRIMEHPC FX10 use a proprietary three-dimensional torus 3D mesh interconnect called Tofu. === 3D Torus performance simulation === Sandeep Palur and Dr. Ioan Raicu from Illinois Institute of Technology conducted experiments to simulate 3D torus performance. Their experiments ran on a computer with 250GB RAM, 48 cores and x86_64 architecture. The simulator they used was ROSS (Rensselaer’s Optimistic Simulation System). They mainly focused on three aspects: Varying network size Varying number of servers Varying message size They concluded that throughput decreases with the increase of servers and network size. Otherwise, throughput increases with the increase of message size. === 6D Torus product performance === Fujitsu Limited developed a 6D torus computer model called "Tofu". In their model, a 6D torus can achieve 100 GB/s off-chip bandwidth, 12 times higher scalability than a 3D torus, and high fault tolerance. The model is used in the K computer and Fugaku. === Cost === While long wrap-around links may be the easiest way to visualize the connection topology, in practice, restrictions on cable lengths often make long wrap-around links impractical. Instead, directly connected nodes—including nodes that the above visualization places on opposite edges of a grid, connected by a long wrap-around link—are physically placed nearly adjacent to each other in a folded torus network. Every link in the folded torus network is very short—almost as short as the nearest-neighbor links in a simple grid interconnect—and therefore low-latency.
Read more →
Communications security

Communications security is the discipline of preventing unauthorized interceptors from accessing telecommunications in an intelligible form, while still delivering content to the intended recipients. In the North Atlantic Treaty Organization culture, including United States Department of Defense culture, it is often referred to by the abbreviation COMSEC. The field includes cryptographic security, transmission security, emissions security and physical security of COMSEC equipment and associated keying material. COMSEC is used to protect both classified and unclassified traffic on military communications networks, including voice, video, and data. It is used for both analog and digital applications, and both wired and wireless links. Voice over secure internet protocol VOSIP has become the de facto standard for securing voice communication, replacing the need for Secure Terminal Equipment (STE) in much of NATO, including the U.S.A. USCENTCOM moved entirely to VOSIP in 2008. == Specialties == Cryptographic security: The component of communications security that results from the provision of technically sound cryptosystems and their proper use. This includes ensuring message confidentiality and authenticity. Emission security (EMSEC): The protection resulting from all measures taken to deny unauthorized persons information of value that might be derived from communications systems and cryptographic equipment intercepts and the interception and analysis of compromising emanations from cryptographic equipment, information systems, and telecommunications systems. Transmission security (TRANSEC): The component of communications security that results from the application of measures designed to protect transmissions from interception and exploitation by means other than cryptanalysis (e.g. frequency hopping and spread spectrum). Physical security: The component of communications security that results from all physical measures necessary to safeguard classified equipment, material, and documents from access thereto or observation thereof by unauthorized persons. == Related terms == ACES – Automated Communications Engineering Software AEK – Algorithmic Encryption Key AKMS – the Army Key Management System CCI – Controlled Cryptographic Item - equipment which contains COMSEC embedded devices CT3 – Common Tier 3 DTD – Data Transfer Device ICOM – Integrated COMSEC, e.g. a radio with built in encryption KEK – Key Encryption Key KG-30 – family of COMSEC equipment KOI-18 – Tape Reader General Purpose KPK – Key production key KYK-13 – Electronic Transfer Device KYX-15 – Electronic Transfer Device LCMS – Local COMSEC Management Software OTAR – Over the Air Rekeying OWK – Over the Wire Key SKL – Simple Key Loader SOI – Signal operating instructions STE – Secure Terminal Equipment (secure phone) STU-III – (obsolete secure phone, replaced by STE) TED – Trunk Encryption Device such as the WALBURN/KG family TEK – Traffic Encryption Key TPI – Two person integrity TSEC – Telecommunications Security (sometimes referred to in error transmission security or TRANSEC) Types of COMSEC equipment: Authentication equipment Crypto equipment: Any equipment that embodies cryptographic logic or performs one or more cryptographic functions (key generation, encryption, and authentication). Crypto-ancillary equipment: Equipment designed specifically to facilitate efficient or reliable operation of crypto-equipment, without performing cryptographic functions itself. Crypto-production equipment: Equipment used to produce or load keying material == DoD Electronic Key Management System == The Electronic Key Management System (EKMS) is a United States Department of Defense (DoD) key management, COMSEC material distribution, and logistics support system. The National Security Agency (NSA) established the EKMS program to supply electronic key to COMSEC devices in securely and timely manner, and to provide COMSEC managers with an automated system capable of ordering, generation, production, distribution, storage, security accounting, and access control. The Army's platform in the four-tiered EKMS, AKMS, automates frequency management and COMSEC management operations. It eliminates paper keying material, hardcopy Signal operating instructions (SOI) and saves the time and resources required for courier distribution. It has 4 components: LCMS provides automation for the detailed accounting required for every COMSEC account, and electronic key generation and distribution capability. ACES is the frequency management portion of AKMS. ACES has been designated by the Military Communications Electronics Board as the joint standard for use by all services in development of frequency management and crypto-net planning. CT3 with DTD software is in a fielded, ruggedized hand-held device that handles, views, stores, and loads SOI, Key, and electronic protection data. DTD provides an improved net-control device to automate crypto-net control operations for communications networks employing electronically keyed COMSEC equipment. SKL is a hand-held PDA that handles, views, stores, and loads SOI, Key, and electronic protection data. == Key Management Infrastructure (KMI) Program == KMI is intended to replace the legacy Electronic Key Management System to provide a means for securely ordering, generating, producing, distributing, managing, and auditing cryptographic products (e.g., asymmetric keys, symmetric keys, manual cryptographic systems, and cryptographic applications). This system is currently being fielded by Major Commands and variants will be required for non-DoD Agencies with a COMSEC Mission.
Read more →
NASA AI Assisted-Air Quality Monitoring Project

The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.
Read more →
Comparison of OLAP servers

The following tables compare general and technical information for a number of online analytical processing (OLAP) servers. Please see the individual products articles for further information. == General information == == Data storage modes == == APIs and query languages == APIs and query languages OLAP servers support. == OLAP distinctive features == A list of OLAP features that are not supported by all vendors. All vendors support features such as parent-child, multilevel hierarchy, drilldown. == System limits == == Security == == Operating systems == The OLAP servers can run on the following operating systems: Note (1):The server availability depends on Java Virtual Machine not on the operating system == Support information ==
Read more →
Data hub

A data hub is a center of data exchange that is supported by data science, data engineering, and data warehouse technologies to interact with endpoints such as applications and algorithms. == Features == A data hub differs from a data warehouse in that it is generally unintegrated and often at different grains. It differs from an operational data store because a data hub does not need to be limited to operational data. A data hub differs from a data lake by homogenizing data and possibly serving data in multiple desired formats, rather than simply storing it in one place, and by adding other value to the data such as de-duplication, quality, security, and a standardized set of query services. A data lake tends to store data in one place for availability, and allow/require the consumer to process or add value to the data. Data hubs are ideally the "go-to" place for data within an enterprise, so that many point-to-point connections between callers and data suppliers do not need to be made, and so that the data hub organization can negotiate deliverables and schedules with various data enclave teams, rather than being an organizational free-for-all as different teams try to get new services and features from many other teams.
Read more →
Tableau de Concordance

The Tableau de Concordance was the main French diplomatic code used during World War I; the term also refers to any message sent using the code. It was a superenciphered four-digit code that was changed three times between 1 August 1914 and 15 January 1915. The Tableau de Concordance is considered superenciphered because there is more than one step required to use it. First, each word in a message is replaced by four digits via a codebook. These four digits are divided into three groups (one digit, two digits, one digit) so that when the whole message has been translated into code, the four-digit sets can be put together so it looks like the entire message is made up of two-digit pairs. This is called a "Straddle Gimmick." Then, in turn, each of these two digit pairs (and the single digits at the beginning and end) are replaced by two letters. The letters are then combined with no spaces for the final ciphertext. The manual for the Tableau de Concordance included the instruction that if there was not adequate time for completely enciphering the message, it should simply be sent in clear, because a partially enciphered message would have provided insight into the inner workings of the code.
Read more →
Art Recognition

Art Recognition is a Swiss technology company headquartered in Adliswil, within the Zurich metropolitan area, Switzerland. Art Recognition specializes in the application of artificial intelligence (AI) for art authentication and the detection of art forgeries. == Overview == Art Recognition was established in 2019 by Dr. Carina Popovici and Christiane Hoppe-Oehl. Art Recognition employs a combination of machine learning techniques, computer vision algorithms, and deep neural networks to assess the authenticity of artworks. The company's technology undergoes a process of data collection, dataset preparation, and training. === Academic partnerships and grants === Art Recognition has established a relationship with Innosuisse, a Swiss innovation agency, to expand its research and development initiatives. It has also formed a strategic collaboration with Nils Büttner, an art historian and professor at the State Academy of Fine Arts Stuttgart (ABK Stuttgart). === Notable developments === In May 2024, Art Recognition played a key role in identifying counterfeit artworks, including alleged Monets and Renoirs, being sold on eBay. Germann Auction in November 2024 became the first auction house to successfully conduct a sale of artwork authenticated entirely by artificial intelligence. As of January 2025, Art Recognition has appointed art crime expert and Pulitzer Prize finalist Noah Charney as an advisor. === Recognition and debates === The company was featured on the front page of The Wall Street Journal for its involvement in the authentication case of the Flaget Madonna, believed to have been partly painted by Raphael. A broadcast by the Swiss public television SRF covered how the algorithm can be used to detect art forgeries with high accuracy. The technology developed by Art Recognition has been recognized for its role in providing a technology-based art authentication solution, compared to traditional methods. == Controversial cases == Art Recognition's AI algorithm has been applied to several high-profile and controversial artworks, sparking significant interest and debate in the art world. Samson and Delilah at the National Gallery in London: The National Gallery's "Samson and Delilah", traditionally attributed to the artist Rubens, has also been examined using Art Recognition's AI, which has assessed the painting as non-authentic. De Brecy Tondo Madonna. A research team from Bradford University and the University of Nottingham initially attributed the painting to Raphael, employing an AI face recognition software, while the AI developed at Art Recognition returned a negative result. The Bradford group's AI was trained on 49 images, whereas Art Recognition employed a larger dataset of over 100 images. Lucian Freud Painting Controversy: Featured in The New Yorker, a painting attributed to Lucian Freud became a subject of dispute. Art Recognition's AI analysis played a big role in examining the painting's authenticity. Titian at Kunsthaus Zürich: A painting attributed to Titian, housed at Kunsthaus Zürich, has been a topic of debate among art experts. The application of Art Recognition's technology offered a new perspective. Following this debate, Kunsthaus Zürich has announced plans to initiate a comprehensive project aimed at resolving the authenticity questions surrounding the painting. Art Recognition has contributed to the authentication debate surrounding The Polish Rider, a painting traditionally attributed to Rembrandt but subject to scholarly debate.
Read more →
Data hub

A data hub is a center of data exchange that is supported by data science, data engineering, and data warehouse technologies to interact with endpoints such as applications and algorithms. == Features == A data hub differs from a data warehouse in that it is generally unintegrated and often at different grains. It differs from an operational data store because a data hub does not need to be limited to operational data. A data hub differs from a data lake by homogenizing data and possibly serving data in multiple desired formats, rather than simply storing it in one place, and by adding other value to the data such as de-duplication, quality, security, and a standardized set of query services. A data lake tends to store data in one place for availability, and allow/require the consumer to process or add value to the data. Data hubs are ideally the "go-to" place for data within an enterprise, so that many point-to-point connections between callers and data suppliers do not need to be made, and so that the data hub organization can negotiate deliverables and schedules with various data enclave teams, rather than being an organizational free-for-all as different teams try to get new services and features from many other teams.
Read more →
Philco computers

Philco was one of the pioneers of transistorized computers, also known as second-generation computers. After the company developed the surface-barrier transistor, which was much faster than previous point-contact types, it was awarded contracts for military and government computers. Commercialized derivatives of some of these designs became successful business and scientific computers. The TRANSAC (Transistor Automatic Computer) Model S-1000 was released as a scientific computer. The TRANSAC S-2000 mainframe computer system was first produced in 1958, and a family of compatible machines, with increasing performance, was released over the next several years. However, the mainframe computer market was dominated by IBM. Other companies could not deploy resources for development, customer support and marketing on the scale that IBM could afford, making competition in this segment difficult after the introduction of the IBM 360 family. Philco went bankrupt and was purchased in 1961 by Ford Motor Company, but the computer division carried on until the Philco division of Ford exited the computer business in 1963. The Ford company maintained one Philco mainframe in use until 1981. == The surface-barrier transistor == The surface-barrier transistor developed by Philco in 1953 had a much higher frequency response than the original point-contact transistors. The transistor was made of a thin crystal of germanium, which was electrolytically etched with pits on either side forming a very thin base region, on the order of 5 micrometers. Philco's process for etching was United States patent number 2,885,571. Philco surface-barrier transistors were used in TX-0, and in early models of what would become the DEC PDP product line. Although relatively fast, the small size of the devices limited their power to circuits operating at a few tens of milliwatts. == Military and government == Between 1955 and 1957, Philco built transistor computers for use in aircraft, models C-1000, C-1100, and C-1102, intended for airborne real-time applications. By 1957, the C-1102 had been used by a civilian sector customer. The BASICPAC AN/TYK 6V (first delivery in 1961), COMPAC AN/TYK 4V (not completed), and LOGICPAC systems were built for the US Army as transportable computer systems for use with their Fieldata concept of integrated information management. BASICPAC was a transistorized computer with up to 28,672 words of 38-bit core memory (including sign and parity), available in several configurations from a minimum system, to a truck-borne mobile version, to a fully expanded system. Basic clock periods was 1 microsecond (which gives a clock rate of 1 MHz), with 12 microsecond memory access and a fixed-point multiplication taking 242 microseconds. Input/output was by paper tape reader and punch, or through a teletypewriter. With additional hardware, magnetic tape storage was also available, with up to seven I/O devices. The instruction set had 31 basic operation codes and nine opcodes for I/O === CXPQ === Philco was contracted by the US Navy to build the CXPQ computer. One model was completed and installed at the David Taylor Model Basin. This design was later adapted to become the commercial TRANSAC S-2000. Only one CXPQ was built. The CXPQ is a 48-bit transistorized computer. === SOLO === In 1955, the National Security Agency through the US Navy contracted with Philco to produce a computer suitable for use as a workstation, with an architecture based on the vacuum-tube computer system called Atlas II already in use at the NSA, and similar to the commercial UNIVAC 1103. At the time, Philco was the largest producer of surface barrier transistors, which were the only type available with the speed and quantities required for a computer. The SOLO prototype was delivered in 1958, but required extensive debugging at NSA. Difficulties were encountered with core memory and power supplies. SOLO used paper tape and teleprinter machines for input and output. SOLO cost about $1 million US, and contained 8,000 transistors. While the system was extensively used for training, testing, research and development, no additional units were ordered. SOLO was removed from active service in 1963. The design of the SOLO became commercialized as Philco's TRANSAC Model S-1000. == Commercial == === S-1000 === The TRANSAC S-1000 was a scientific computer with a 36-bit word length and 4096 words of core memory. It was packaged in a container about the size of a large office desk, and used only 1.2 kilowatts, much less than vacuum-tube-based computers of similar capacity. In a 1961 survey, about 15 S-1000 computer installations had been identified. It weighed about 1,650 pounds (750 kg). === S-2000 === The TRANSAC S-2000 was a large mainframe system intended for both business and scientific work. It had a 48-bit word length and supported calculations in fixed point, floating point and binary-coded decimal formats. The original S-2000 "TRANSAC" (Transistor Automatic Computer) released in 1958 was later designated Model 210; it was used internally at Philco. Similar to the Control Data Corporation Model 1604, it was a 48-bit fully transistorized computer. Three succeeding models were released in the series, all compatible with the software of the original model. The Model 211 was introduced in 1960, using micro-alloy diffused field-effect transistors, requiring significant redesign of circuits compared to the original. The TRANSAC S-2000/Philco 210/211 weighed about 2,000 pounds (910 kg). By 1964, eighteen Model 210, eighteen Model 211 and seven Model 212 systems had been sold. After Philco was purchased by Ford Motor Company, the Model 212 was introduced in 1962 and released in 1963. It had 65,535 words of 48-bit memory. Initially made with 6-microsecond core memory, it had better performance than the IBM 7094 transistor computer. It was later upgraded in 1964 to 2-microsecond core memory, which gave the machine floating-point performance greater than the IBM 7030 Stretch computer. A Model 213 was announced in 1964 but never built. By that time competition from IBM had made the Philco computer operations no longer profitable for Ford, and the division was closed down. The Model 212 could carry out a floating-point multiplication in 22 microseconds. Each word contained two 24-bit instructions with 16 bits of address information and eight bits for the opcode. There were 225 different valid opcodes in the Model 212; invalid opcodes were detected and halted the machine. The CPU had an accumulator register of 48 bits, three general-purpose registers of 24 bits, and 32 index registers of 15 bits. Main memory size ranged from 4K words to 64K words. Only the first model had a magnetic drum memory; later editions used tape drives. The Model 212 weighed about 6,500 pounds (3.3 short tons; 2.9 t). Software for the S-2000 initially consisted of TAC (Translator-Assembler-Compiler), and ALTAC, a FORTRAN II-like language with some differences from the IBM 704 FORTRAN implementation. A COBOL compiler was also available, targeted at business applications. The Philco 2400 was the input/output system for the S-2000. Operations such as reading cards or printing were carried out through magnetic tapes, thereby offloading the S-2000 from relatively slow input/output processing. The 2400 had a 24-bit word length and could be supplied with 4K to 32K characters (1K to 8K words) of core memory, rated at 3-microsecond cycle time. The instruction set was aimed at character I/O use. The idea of base registers, implemented in Philco computers, influenced the design of IBM/360. The last Philco TRANSAC S-2000 Model 212 was taken out of service in December 1981, after 19 years of service at Ford.
Read more →